Prevent Car Lights dewy ?

Prevent Car Lights dewy

Author: chadieWE often find the main light vehicles filled with dew on the inside.This is caused by moisture trapped inside the house lights are condensed to form water droplets on the inside of the lamp lens.Condensation caused by differences in temperature between the outside of the house lights are much cooler than the inside.
Water vapor that is in the house lights indicate that the house lights had been intruding water. Generally, the house lights have a hole at the top and bottom of its function to accommodate the difference in air pressure. Both of these holes are usually designed to take in water is not easy.
Actually, if the outer lens is cooler, at night for example, there will be condensation on the inside. When the temperature outside during the morning before returning to normal, then the dew will soon disappear and this is very normal.
There is also a light house that is not equipped with ventilation at all. Yeng Condensation occurs usually as a result of cracks or leaks. Because they do not have holes, this model lights will usually be more severe when exposure to water.
Steam and condensed water will stick with the great. It's no longer in the form of water droplets stuck to the inside of the lens, but like raindrops. This process continues so that the part in the flooded light like an aquarium. If you have this, the only way is to unpack.
Remove all lights, sockets and cables and remove the lamp from the holder carefully. Once removed from the stand, clean the entire house lights with a mixture of water and soft soap, especially the inside. After that, dry with soft cloth to dry and clean. Strive not to have a drop of water left behind and trapped in it.
If still there, pour a spoonful of alcohol in the section that still contained water and throw back. Repeat several times, then dry with a way of drying in the sun while aerated. It could also blow it with hair dryer, but not too close for plastic does not melt.
Once dry completely replace the lamp on the stand. If possible, you can make a ventilation hole in the bottom of the lamp that functions similar to the drainage, then given a rubber cover. Good luck. (OL-07)source: mediaindonesia.com

thank you for your visit

Posted in: tips and tricks